Zinc alloy electroplating die-casting polishing

MOQ: 1 Pieces

Delivery time: 15 Day

E-mail: sales@toolingmfg.com

Product Advantages

Zinc die casting alloys, density 6.75g/cm3, melting point temperature 384 degrees. Zinc alloy hardness is about 65-140, tensile strength is 260-440,... Strength is better than aluminum alloy, aluminum alloy density 2.7g/cm3,Higher density than aluminum alloy, suitable for polishing electrical degree.

Product Details

Product Introduction

Zinc die casting alloys, density 6.75g/cm3, melting point temperature 384 degrees.

Zinc alloy hardness is about 65-140, tensile strength is 260-440,... Strength is better than aluminum alloy, aluminum alloy density 2.7g/cm3,Higher density than aluminum alloy, suitable for polishing electrical degree.

The number of mold holes is 1 hole, the front and back mold material SKD61, and the tonnage of the die-casting machine is 250 tons. Forming cycle 52S.

Production Technology

After the die casting is completed, the runner roughing is removed with a sawing machine, the runner finishing is removed with CNC, and the holes and grooves are machined with CNC.Deburring, the production process is as follows:

01. Die-casting

03. CNC

05. Blasting Edge

02. Deslagging ladle

04. Drilling And Tapping

06. Tolish

07. Check the Packing

06. Tolish

Production Technology

We started to cooperate with the customer in 2008. At the beginning, the cooperation was a plastic project, opening mold injection molding, and the cooperation was smooth. In 2011, we cooperated with customers on three plastic projects, open mold injection molding, and the cooperation was relatively smooth. In 2013, we cooperated with customers on three zinc alloy die-casting projects, open mold die-casting molding and post-processing.

This is one of the zinc alloy die casting projects, steam has a certain representative.

The selection of the feed port of this product is very important. There is a round hole in the center of the product. We finally feed in the round hole, and then remove the feed port through secondary processing to ensure the rationality of the feed and the size of the product.